Mon-Fri: 7AM-7PM, Sat: 8AM-5PM Licensed & Insured [email protected] Serving all of New York

Commercial Pressure Washing for Concrete in New York

Pressure wash with a surface cleaner for concrete. Building washing and flatwork cleaning for offices, retail, restaurants, warehouses and other commercial properties, scheduled around your hours. Typical cost $400-$2,000.

Grime, mildew and stains build up a little at a time until one day the outside of your property looks years older. Commercial Pressure Washing for Concrete in New York brings it back, usually in a single visit. For concrete, that means pressure wash with a surface cleaner.

Method and pressure

Pressure wash with a surface cleanerCleaning method
Usually 2,500-3,500 PSI with a rotary surface cleaner for even resultsPressure

Cleaning solution: A degreaser for oil spots and a pre-treatment for organic growth; post-treatment slows regrowth.

What to know about cleaning concrete

Plain broom-finish concrete is the surface pressure washing is made for. A rotary surface cleaner gives an even finish without the stripes a wand leaves, and hot water helps with grease and oil.

Avoid: Holding a narrow tip close to the surface, which etches lines into the cream layer of the concrete.

How often: Every year, or every 6 months in shaded, damp spots.

Signs you need commercial pressure washing for concrete

  • Dirty entrances and walkways
  • Stained building walls and signs
  • Gum, grease and spills around doors
  • Customer or tenant complaints
  • Health or property manager inspections coming up

What causes the dirt and stains

  • Heavy foot traffic
  • Vehicle traffic and drips
  • Food and grease near restaurants
  • Pollution and weather

Easy upkeep between cleanings

  • Sweep entrances daily
  • Clean up spills right away
  • Keep dumpster areas closed and clean

Not sure what you're looking at? The free stain identifier and safe pressure guide explain each stain and surface.

Why more pressure isn’t better

  • Wash water reaching storm drains, which can violate local stormwater rules
  • Slips and liability during business hours
  • Damaging signs, windows and finishes

How we handle commercial pressure washing for concrete

  1. Survey the property and plan around your hours
  2. Set up signs and control wash water
  3. Pre-treat stains, gum and grease
  4. Clean walls and flatwork with the right pressure
  5. Final walkthrough and maintenance schedule

How much does commercial pressure washing for concrete cost?

$400-$2,000Typical range for a typical small to mid-size commercial building
Half a day to several daysTypical time on site
Quarterly to yearly, depending on trafficRecommended frequency

What moves the price:

  • Area and number of buildings
  • Scheduling: early-morning, overnight or weekend work
  • Whether wash water has to be recovered under local stormwater rules
  • Frequency: recurring service is usually priced lower per visit

These are typical U.S. ranges, not a quote. You get an exact price before any work starts. For a quick estimate, try the pressure washing cost calculator.

Other services for concrete

Commercial Pressure Washing for Concrete in New York

Businesses in New York typically schedule exterior cleaning in spring and fall, with entrances and high-traffic walkways cleaned more often.

Near the coast, salt air leaves a film on siding, windows, screens and railings that dulls finishes and speeds up corrosion on metal. Regular rinsing and washing help protect them.

We cover 652 cities and towns across New York. Find commercial pressure washing for concrete in your city:

Commercial Pressure Washing for Concrete: frequently asked questions

How much does commercial pressure washing for concrete cost in New York?

Commercial Pressure Washing for Concrete typically costs $400-$2,000 for a typical small to mid-size commercial building, and usually takes Half a day to several days. The exact price depends on the size and condition, and you get it before any work starts. Call (555) 010-0000 for a free quote.

Do you use high pressure for commercial pressure washing for concrete?

For concrete: usually 2,500-3,500 PSI with a rotary surface cleaner for even results. What we avoid: holding a narrow tip close to the surface, which etches lines into the cream layer of the concrete. We keep the pressure even and controlled, with the right tools for the surface.

Is commercial pressure washing for concrete safe for my plants and pets?

We pre-wet plants and lawns, keep cleaning solutions diluted to what the surface needs, and rinse landscaping again when we finish. Keep pets and children inside until surfaces are rinsed and dry.

How often should I schedule commercial pressure washing for concrete?

Every year, or every 6 months in shaded, damp spots. Shade, nearby trees, humidity and heavy traffic mean more frequent cleaning; sunny, dry spots can go longer. Our free cleaning frequency tool gives a recommendation for your climate.

What if it rains on the day?

Light rain doesn't stop most washing, but heavy rain, high wind, lightning and freezing temperatures do. If the weather isn't right, we reschedule at no charge. Our work is backed by a satisfaction guarantee.

More services

Popular Exterior Cleaning Services in New York

Soft Washing for Asphalt Shingle Roofs

Soft wash (no pressure). The black streaks on many asphalt roofs are a type of algae, often Gloeocapsa magma, that feeds on the limestone filler in shingles.

Typical $300-$800

Oil Stain Removal for Concrete

Pressure wash with a surface cleaner. Plain broom-finish concrete is the surface pressure washing is made for.

Typical $100-$300

Pressure Washing for Asphalt

Low-to-moderate pressure wash. Asphalt is softer than concrete and is held together by its binder, so it is washed at lower pressure.

Typical $150-$600

Driveway Cleaning for Exposed Aggregate

Moderate-pressure wash. Exposed aggregate concrete has stones showing at the surface.

Typical $150-$400

House Washing

A full exterior wash of siding, trim, soffits and eaves that removes dirt, cobwebs, mildew and algae.

Typical $300-$700

Roof Cleaning for Asphalt Shingle Roofs

Soft wash (no pressure). The black streaks on many asphalt roofs are a type of algae, often Gloeocapsa magma, that feeds on the limestone filler in shingles.

Typical $400-$1,000

HOA & Apartment Pressure Washing

Building washing, sidewalks, breezeways, pools and amenity areas for HOAs, apartments and condos.

Typical $800-$5,000

Patio Cleaning

Patio cleaning for concrete, pavers and natural stone, with the pressure and cleaner matched to the material.

Typical $150-$400

Sidewalk & Walkway Cleaning for Flagstone

Low-to-moderate pressure wash. Flagstone covers several stones, including sandstone, slate, bluestone and limestone, and they react differently to pressure and chemicals.

Typical $100-$250

Pool Deck Cleaning

Pool deck cleaning that removes slippery algae, sunscreen residue and stains without damaging coatings or stone.

Typical $200-$500

Fence Cleaning

Fence washing for wood and vinyl fences that removes gray weathering, green algae, mildew and sprinkler stains.

Typical $200-$600

Patio Cleaning for Exposed Aggregate

Moderate-pressure wash. Exposed aggregate concrete has stones showing at the surface.

Typical $150-$400

Ready for a cleaner home or business?

Get a free pressure washing quote in New York. Tell us what needs cleaning and we'll give you a price and the next available date.

Call NowFree Quote